ITEM | PCB | FLEX | RIGID-FLEX |
Maximale Schicht | 60L | 8L | 36L |
Innere Schicht Min Trace/Space | 3/3mil | 3/3mil | 3/3mil |
Out Layer Min Trace/Space | 3/3mil | 3,5/4 Millionen | 3,5/4 Millionen |
Innenschicht Max Kupfer | 6oz | 2oz | 6oz |
Außenschicht Max Kupfer | 10 Unzen | 2oz | 3oz |
Min Mechanisches Bohren | 0,15 mm | 0,1 mm | 0,15 mm |
Min Laserbohren | 0,1 mm | 0,1 mm | 0,1 mm |
Streckungsverhältnis (mechanisches Bohren) | 20:1 | 10:1 | 12:1 |
Streckungsverhältnis (Laserbohren) | 1:1 | / | 1:1 |
Toleranz für Presspassungslöcher | ±0.05mm | ±0.05mm | ±0.05mm |
PTH-Toleranz | ±0.075mm | ±0.075mm | ±0.075mm |
NPTH-Toleranz | ±0.05mm | ±0.05mm | ±0.05mm |
Senkungstoleranz | ±0.15mm | ±0.15mm | ±0.15mm |
Dicke der Platte | 0,2-8 mm | 0,1-0,5 mm | 0,4-3 mm |
Board Thickness Tolerance(<1.0mm) | ±0.1mm | ±0.05mm | ±0.1mm |
Board Thickness Tolerance(≥1.0mm) | ±10% | / | ±10% |
Impedanztoleranz | Single-Ended:±5Ω(≤50Ω),±7%(>50Ω) Difference:±5Ω(≤50Ω),±7%(>50Ω) |
Single-Ended:±5Ω(≤50Ω),±10%(>50Ω) Difference:±5Ω(≤50Ω),±10%(>50Ω) |
Single-Ended:±5Ω(≤50Ω),±10%(>50Ω) Difference:±5Ω(≤50Ω),±10%(>50Ω) |
Mindestgröße der Karte | 5*5mm | 5*10mm | 10*10mm |
Maximale Plattengröße | 22.5*30Zoll | 9*14Zoll | 22.5*30Zoll |
Kontur-Toleranz | ±0.1mm | ±0.05mm | ±0.1mm |
Min BGA | 7 Millionen | 7 Millionen | 7 Millionen |
Min SMT | 7*10mil | 7*10mil | 7*10mil |
Oberflächenbehandlung | Electroplated Nickel Gold,ENIG,Gold Finger,ImmersionSilver,Immersion Tin,HASL(LF),OSP,ENEPIG,Flash Gold; Hard Gold Plating, Soft Gold Plating,Nickel Palladium | Electroplated Nickel Gold,ENIG,Immersion Silver,Immersion Tin,HASL(LF),OSP,ENEPIG,Flash Gold; Hard Gold Plating, Soft Gold Plating,Nickel Palladium | Electroplated Nickel Gold,ENIG,Gold Finger,Immersion Silver,Immersion Tin,HASL(LF),OSP,ENEPIG,Flash Gold; Hard Gold Plating, Soft Gold Plating,Nickel Palladium |
Lötmaske | Grün, Schwarz, Blau, Rot, Mattgrün | Grüne Lötstoppmaske/ schwarze Deckfolie oder gelbe Deckfolie | Grün, Schwarz, Blau, Rot, Mattgrün |
Min. Abstand der Lötmaske | 1,5 Mio. | 3 Millionen | 1,5 Mio. |
Min Lötmaske Damm | 3 Millionen | 8 Millionen | 3 Millionen |
Legende | Weiß, Schwarz, Rot, Gelb | Weiß, Schwarz, Rot, Gelb | Weiß, Schwarz, Rot, Gelb |
Min. Legende Breite/Höhe | 4/23mil | 4/23mil | 4/23mil |
Dehnungsfilet Breite von Einlagige Platte | / | Die Plattendicke beträgt 3-6 Mal | Die Plattendicke ist 3-7 mal (Flexible Plattendicke) |
Dehnungsfilet Breite der Doppellagenplatte | / | Die Plattendicke beträgt 6-10 Mal | Die Plattendicke ist 6-11 mal (Flexible Plattendicke) |
Dehnungsfilet Breite der Mehrschichtplatte | / | Die Plattendicke beträgt 10-15 Mal | Die Plattendicke ist 10-16 mal (Flexible Plattendicke) |
Dehnungsfilet Breite von Dynamisch | / | Die Plattendicke beträgt 20-40 Mal | Die Plattendicke ist 20-40 mal (Flexible Plattendicke) |
Spendebreite | / | 1.5±0.5mm | 1.5±0.5mm |
Verzug (Minimum) | 0.30% | / | 0.05% |